The warehouse and online shop will be closed from 27.4.2024 to 5.5.2024 due to spring holiday. All accepted orders will be dispatched from 6.5.2024.

BUD SEASON, postal and internet trade, Letališka cesta 34, 1000 Ljubljana, E-MAIL: info@budseason.eu, GSM: +386 51 425 542

ABOUT US   |   CONTACT

Category filter

Out of stock

TechGrow Clima Micro Plus 2×2.5A (Negativepressure)

GLS Delivery
for EU Countries

EXPERT ADVICE

SAFE PURCHASE

With the TechGrow Clima Micro Plus 2×2.5A (Negativepressure) temperature and negative pressure control, you can easily create the right temperature in your room. This controller not only regulates the minimum rotation speed of the main fan to reach or maintain the desired temperature, but also regulates the desired air pressure of the second fan for optimal air circulation.

Manufacturer: 

TechGrow
Availability: Sold out
Code: ean554

Delivery: 2 - 5 working days

125,00  Z vklj. DDV

Out of stock

Description

TechGrow Clima Micro Plus 2×2.5A (Negativepressure)

TechGrow controller for Temperature and Negative Pressure Control. TechGrow model: Clima Micro Plus 2x 2.5A

With the TechGrow Clima Micro Plus 2×2.5A (Negativepressure) temperature and negative pressure control, you can easily create the right temperature in your room. This controller not only regulates the minimum rotation speed of the main fan to reach or maintain the desired temperature, but also regulates the desired air pressure of the second fan for optimal air circulation.

Fan control is based on minimum fan speed, temperature and hysteresis, negative air pressure and maximum fan speed (100%). The display shows the actual temperature measured and the minimum/maximum values recorded from the connected sensor.

TheTechGrow Clima Micro Plus 2×2.5A (Negativepressure) Smart Controller can be installed instantly with the option to set the temperature hysteresis.

Features:

  • Clima Micro Plus temperature/negative pressure control can measure and display the current temperature value of the connected sensor and record and display minimum/maximum values
  • Controls the minimum fan speed of the main fan to achieve or maintain the desired temperature; in addition, the device controls the negative air pressure for optimum air circulation
  • Minimum fan speed), set temperature and set negative pressure are stored in case of power failure
  • Temperature setting range: 15°C – 35°C
  • Hysteresis setting range: 1°C – 5°C
  • Negative air pressure setting range: up to 50% of the main fan speed
  • Minimum fan speed setting range: 10% – 100%
  • The screen is updated every second
  • Automatic switch-off of the display backlight after 60 seconds
  • Automatic detection of cable failure or poor connection to the sensor
  • 2 UTP ports
  • 2 sockets
  • Easy fuse replacement (spare fuse included)
  • Sensor option: TempProbe- NOT APPLICABLE

Origin:Netherlands

Warranty: 1 Year

Additional information

Weight 1,5 kg

Good to know

Active Charcoal

Using activated carbon?

Activated carbon is widely used in home filtration systems. It can be used as a stand-alone filter to reduce or eliminate bad odour and taste, chlorine and a wide range of organic contaminants from public tap water (pre-treated or chlorinated) and to significantly improve the quality of drinking water.

It is also used to pre-treat water, as a component of reverse osmosis, to filter out many organic contaminants, chlorine and other substances that damage the reverse osmosis membrane. Filters made of 0.5 micron block-pressed activated carbon are commonly used to filter cysts such as Giardia and Cryptosporidium.

Activated carbon filters generally do not bind dissolved inorganic compounds, such as minerals or water. salts that cause hardness of water, limescale, antimony, arsenic, barium, beryllium, cadmium, chromium, copper, fluoride, mercury, nickel, nitrates, nitrites, selenium, sulphate, thallium and certain radioactive elements. To trap these contaminants, a reverse osmosis system is needed (some of which are also trapped by filters containing KDF® 55).

Why Activated Charcoal?

As activated carbon, especially granular activated carbon, does not retain mechanical particles well enough, it is highly recommended to install a pre-filter in front of the activated carbon to filter out mechanical particles. The pre-filter extends the life of the activated carbon filter cartridge by trapping contaminants that would otherwise clog the fine pores of the activated carbon, thus reducing the surface area for adsorption of other contaminants.

YOU MIGHT ALSO BE INTERESTED IN

Controllers, Sensors and Probes, Ventilation

43,01  Z vklj. DDV

Moulded Parts, Ventilation

10,98  Z vklj. DDV

Moulded Parts, Ventilation

8,54  Z vklj. DDV

Moulded Parts, Ventilation

6,71  Z vklj. DDV

GLS Delivery
for EU Countries

2-5 working days

SAFE SHOPPING

Credit card payment option,
on invoice and cash on delivery.

100% SATISFACTION GUARANTEE

Technical warranty
products.

SHOW ALL CATEGORIES