Dear, the warehouse will be closed on 25.10.2023. All received online orders will be shipped by GLS courier on 26.10.2023. Thank you for your understanding. Kind regards! Budseason. eu

BUD SEASON, postal and internet trade, Letališka cesta 34, 1000 Ljubljana, E-MAIL:, GSM: +386 51 425 542


Category filter

TechGrow Clima Micro Plus 5A (Temp-RH)

GLS Delivery
for EU Countries



TechGrow Clima Micro Plus 5A (Temp-RH) is a fan controller for temperature/humidity control with TechGrow Clima Micro Plus 5A (Temp-RH).


Availability: On stock
Code: ean5075

Delivery: 2 - 5 working days

99,00  Z vklj. DDV 84,16  Z vklj. DDV

In stock


TechGrow Clima Micro Plus 5A (Temp-RH)

TechGrow Clima Micro Plus 5A (Temp-RH) is a fan controller for temperature/humidity control with TechGrow Clima Micro Plus 5A (Temp-RH). Achieve the desired room temperature and relative humidity with the Temperature/TechGrow Clima Micro Plus 5A (Temp-RH) fan control. The Clima Micro Plus Temp/Humidity fan control is easy to use with 3 rotary knobs to set the minimum fan speed and the desired relative humidity and temperature in your room. This controller also has the option to set the temperature and relative humidity hysteresis.

TechGrow Clima Micro Plus 5A (Temp-RH) alternately displays the current room temperature and relative humidity, the associated setpoint and hysteresis, the minimum and maximum measured values of temperature and relative humidity, the current fan speed and the set minimum fan speed.


  • The TechGrow Clima Micro Plus 5A (Temp-RH) temperature/humidity fan control can measure and display the current temperature and relative humidity values of the connected sensors, and record and display the minimum/maximum values.
  • Controls the lowest fan speed to achieve or maintain the desired temperature and relative humidity
  • In case of power failure, the minimum fan speed, set temperature and set relative humidity are stored
  • Temperature setting range: 15°C – 35°C
  • Temperature hysteresis: 1 °C – 5 °C
  • Minimum fan speed setting range: 10% – 100%
  • relative humidity setting range: 40% – 90%
  • relative humidity hysteresis: 0% – 5%
  • The screen is updated every second
  • Automatic switch-off of the display backlight after 60 seconds
  • Automatic detection of cable failure or poor connection to the sensor
  • 2 UTP ports
  • Available in 5A
  • Easy fuse replacement (spare fuse included)
  • Minimum required sensor: Temp/RH sensor
  • Different sensors available separately

– TechGrow Datalogger (DL-1)- not included! Datalogger option in the image next to the product

– SENSORS are not included! Option to use the sensor in the image next to the product

Warranty: 1.Year

Additional information

Weight 1,5 kg

Good to know

Active Charcoal

Using activated carbon?

Activated carbon is widely used in home filtration systems. It can be used as a stand-alone filter to reduce or eliminate bad odour and taste, chlorine and a wide range of organic contaminants from public tap water (pre-treated or chlorinated) and to significantly improve the quality of drinking water.

It is also used to pre-treat water, as a component of reverse osmosis, to filter out many organic contaminants, chlorine and other substances that damage the reverse osmosis membrane. Filters made of 0.5 micron block-pressed activated carbon are commonly used to filter cysts such as Giardia and Cryptosporidium.

Activated carbon filters generally do not bind dissolved inorganic compounds, such as minerals or water. salts that cause hardness of water, limescale, antimony, arsenic, barium, beryllium, cadmium, chromium, copper, fluoride, mercury, nickel, nitrates, nitrites, selenium, sulphate, thallium and certain radioactive elements. To trap these contaminants, a reverse osmosis system is needed (some of which are also trapped by filters containing KDF® 55).

Why Activated Charcoal?

As activated carbon, especially granular activated carbon, does not retain mechanical particles well enough, it is highly recommended to install a pre-filter in front of the activated carbon to filter out mechanical particles. The pre-filter extends the life of the activated carbon filter cartridge by trapping contaminants that would otherwise clog the fine pores of the activated carbon, thus reducing the surface area for adsorption of other contaminants.


Controllers, Sensors and Probes, Ventilation

43,01  Z vklj. DDV 36,55  Z vklj. DDV

Moulded Parts, Ventilation

10,98  Z vklj. DDV 9,33  Z vklj. DDV

Moulded Parts, Ventilation

8,54  Z vklj. DDV 7,26  Z vklj. DDV

Moulded Parts, Ventilation

7,32  Z vklj. DDV 6,22  Z vklj. DDV

GLS Delivery
for EU Countries

2-5 working days


Credit card payment option,
on invoice and cash on delivery.


Technical warranty