TechGrow Clima Micro Plus (5A) Minspeed

Description

TechGrow Clima Micro Plus (5A) Minspeed

TechGrow Clima Micro Plus (5A) Minspeed is designed to control the minimum fan speed.

Why use:

• Clima Micro Plus 5A (Minimum fan speed)
• Minimum fan speed with Clima Micro Plus
• With the Clima Micro Plus minimum fan speed, you control the minimum fan speed to achieve or maintain the desired room temperature level.
• This efficient controller is easy to use with two rotary knobs to set the minimum speed (0 – 100% capacity) of your fan and the desired room temperature (between 15°C and 35°C). The minimum fan speed of the Clima Micro Plus also has the possibility to set a hysteresis (1°C – 5°C).
• The clear display shows the current room temperature as well as the set temperature, fan speed, minimum and maximum measured temperature and hysteresis. The LED colour indicates whether the room has a stable climate or is too warm.

Features:

• Minimum fan speed Clima Micro Plus can measure and display the current temperature value of connected sensors and record and display the minimum/maximum value
• Controls the lowest fan speed to reach or maintain the desired temperature
• LED indicates stable climate or high temperature
• In the event of a power failure, the minimum speed and temperature setpoints are stored
• Temperature setting range: 15°C – 35°C
• Hysteresis setting range: 1°C – 5°C
• Minimum fan speed setting range: 10% – 100%
• The screen is updated every second
• Automatic switch-off of the display backlight after 60 seconds
• Automatic detection of cable failure or poor connection to the sensor
• 2 UTP inputs
• Available in 5A
• Easy fuse replacement (spare fuse included)
• Minimum required sensor: TempProbe
• Different sensors available separately
• TechGrow Datalogger (DL-1) connection option

Key functions of the Controller:

• Fan and temperature
• Display: yes
• Displays: temp, fan speed, min & max, RH
• Character display: 2 x 8

Software features:

• Temp range: 15°C – 35°C
• Minimum fan speed setting range: 10% – 100%
• RH hysteresis range: 1°C – 5°C
• Minimum values: no

Power supply:

• Power supply: 100v – 240v
• Indoor use: 3 W
• Fuse: 5 Amp
• Triac: 12 Amp
• Power cable: 3 x 1.5 mm / 1.7 m

IMPORTANT: SENSOR NOT INCLUDED

Tip for choosing a temperature sensor/probe

• Temp probe

Compatible Z sensor:

• Temp. RH

Incompatible Z sensor:

• S-Eco 0 / 2.000 ppm
• S-4 0 / 2.000 ppm
• S-2 0 / 2.000 ppm
• S-2 0 / 10.000 ppm
• S-4 0 / 10.000 ppm

Origin:Netherlands

Warranty: 1 year