The warehouse and online shop will be closed from 27.4.2024 to 5.5.2024 due to spring holiday. All accepted orders will be dispatched from 6.5.2024.

BUD SEASON, postal and internet trade, Letališka cesta 34, 1000 Ljubljana, E-MAIL:, GSM: +386 51 425 542


Category filter

Out of stock

TechGrow Clima Micro Plus (5A) Min-Maxspeed

GLS Delivery
for EU Countries




Availability: Sold out
Code: ean009

Delivery: 2 - 5 working days

85,00  Z vklj. DDV

Out of stock


TechGrow controller for fan speed control.

Minimum/maximum speed control of the Clima Micro Plus fan.

With the minimum/maximum speed of the Clima Micro Plus fan, you can reach or maintain the desired temperature level in your room in a very efficient way.

The minimum/maximum fan speed of the Clima Micro Plus is easy to operate with three rotary knobs to set the minimum and maximum fan speed and the desired room temperature (between 15°C and 35°C). The controller even allows you to set the hysteresis (1°C – 5°C).

The LCD display shows the current room temperature, set temperature, fan speed, minimum and maximum measured temperature and hysteresis.


– Minimum/maximum fan speed Clima Micro Plus can measure and display the current temperature of connected sensors and record and display minimum/maximum values

– Controls the minimum and maximum fan speed to reach or maintain the desired temperature

– In case of power failure, the minimum fan speed, maximum fan speed and set temperature are stored

– Temperature setting range: 15°C – 35°C

– Hysteresis setting range: 1°C – 5°C

– Minimum fan speed setting range: 10% – 100%

– Maximum fan speed setting range: 45% – 100%

– The screen is updated every second

– Automatic switch-off of the display backlight after 60 seconds

– Automatic detection of cable failure or poor connection to the sensor

– 2 UTP ports

– Available in 5A

– Easy fuse replacement (spare fuse included)

– Minimum required sensor: TempProbe

– Different sensors available separately

– TechGrow Datalogger (DL-1) connection option


Warranty: 1 Year

Additional information

Weight 1,5 kg

Good to know

Active Charcoal

Using activated carbon?

Activated carbon is widely used in home filtration systems. It can be used as a stand-alone filter to reduce or eliminate bad odour and taste, chlorine and a wide range of organic contaminants from public tap water (pre-treated or chlorinated) and to significantly improve the quality of drinking water.

It is also used to pre-treat water, as a component of reverse osmosis, to filter out many organic contaminants, chlorine and other substances that damage the reverse osmosis membrane. Filters made of 0.5 micron block-pressed activated carbon are commonly used to filter cysts such as Giardia and Cryptosporidium.

Activated carbon filters generally do not bind dissolved inorganic compounds, such as minerals or water. salts that cause hardness of water, limescale, antimony, arsenic, barium, beryllium, cadmium, chromium, copper, fluoride, mercury, nickel, nitrates, nitrites, selenium, sulphate, thallium and certain radioactive elements. To trap these contaminants, a reverse osmosis system is needed (some of which are also trapped by filters containing KDF® 55).

Why Activated Charcoal?

As activated carbon, especially granular activated carbon, does not retain mechanical particles well enough, it is highly recommended to install a pre-filter in front of the activated carbon to filter out mechanical particles. The pre-filter extends the life of the activated carbon filter cartridge by trapping contaminants that would otherwise clog the fine pores of the activated carbon, thus reducing the surface area for adsorption of other contaminants.


Controllers, Sensors and Probes, Ventilation

43,01  Z vklj. DDV

Moulded Parts, Ventilation

10,98  Z vklj. DDV

Moulded Parts, Ventilation

8,54  Z vklj. DDV

Moulded Parts, Ventilation

6,71  Z vklj. DDV

GLS Delivery
for EU Countries

2-5 working days


Credit card payment option,
on invoice and cash on delivery.


Technical warranty