Notice: From 9.1.2026 to 18.1.2026 we are closed for winter hollidays. Online orders will be send out on the 19.1.2026

BUD SEASON, postal and internet trade, Letališka cesta 34, 1000 Ljubljana, E-MAIL: info@budseason.eu, GSM: +386 51 425 542

ABOUT US   |   CONTACT

Category filter

TechGrow CO2 Monitor M-1

GLS and DHL Delivery
for EU Countries

EXPERT ADVICE

SAFE PURCHASE

The TechGrow CO2 Monitor M-1 is ideal for measuring air quality in buildings such as brick houses, basements, offices, schools, nurseries, hospitals, greenhouses, plant nurseries and warehouses. The measurement is taken every second and provides you with detailed information on CO2 concentration, air temperature, relative humidity, dew point temperature and wet bulb temperature.

Manufacturer: 

TechGrow
Availability: On stock
Code: ean0507

Delivery: 2 - 5 working days

215,00  Z vklj. DDV

In stock

Description

TechGrow CO2 Monitor M-1

The TechGrow CO2 Monitor M-1 is ideal for measuring air quality in buildings such as brick houses, basements, offices, schools, nurseries, hospitals, greenhouses, plant nurseries and warehouses. The measurement is taken every second and provides you with detailed information on CO2 concentration, air temperature, relative humidity, dew point temperature and wet bulb temperature.

The M-1 CO2 monitor is plug & play and easy to use. The display has 3 windows for reading different values at the same time. The M-1 CO2 monitor also displays the minimum, maximum and average CO2 values, air temperature and relative humidity, taking a weighted average of the last 15 minutes and 8 hours.

The external switching relay allows easy connection of the M-1 CO2 monitor to the ventilation system. When the CO₂ value exceeds the set upper limit, this will cause an optical and audible alarm. The relay automatically receives the alarm and switches over. The relay switches off when the CO2 value falls below the lower alarm limit.

Finally, the M-1 CO2 monitor has automatic baseline calibration (ABC function) and the possibility to manually calibrate the CO2 sensor to ensure the most accurate measurement. It is assumed that fresh air of approximately 400 ppm will be present in the ventilated room for a period of time during the calibration cycle. This makes this monitor unsuitable for use in indoor environments with high CO₂ levels, such as greenhouses.

Features:

  • Display shows CO₂ value, temperature and humidity (min/max and weighted averages of 15 minutes/8 hours)
  • Provides information on dew point and wet bulb temperature
  • Readings in °C or °F
  • The display has 3 windows for simultaneous reading of values
  • Stable NDIR sensor for CO₂ detection
  • Measurement rate: 1 measurement per second
  • Optical and audible CO₂ alarm
  • Can be connected to a ventilation system
  • Alarm output for ventilation control
  • ABC (automatic baseline calibration) and manual CO₂ calibration
  • The monitor is equipped with a relay for external switching

Origin:Netherlands
Warranty: 1.Year

 

Additional information

Weight 0,2 kg

Good to know

Active Charcoal

Using activated carbon?

Activated carbon is widely used in home filtration systems. It can be used as a stand-alone filter to reduce or eliminate bad odour and taste, chlorine and a wide range of organic contaminants from public tap water (pre-treated or chlorinated) and to significantly improve the quality of drinking water.

It is also used to pre-treat water, as a component of reverse osmosis, to filter out many organic contaminants, chlorine and other substances that damage the reverse osmosis membrane. Filters made of 0.5 micron block-pressed activated carbon are commonly used to filter cysts such as Giardia and Cryptosporidium.

Activated carbon filters generally do not bind dissolved inorganic compounds, such as minerals or water. salts that cause hardness of water, limescale, antimony, arsenic, barium, beryllium, cadmium, chromium, copper, fluoride, mercury, nickel, nitrates, nitrites, selenium, sulphate, thallium and certain radioactive elements. To trap these contaminants, a reverse osmosis system is needed (some of which are also trapped by filters containing KDF® 55).

Why Activated Charcoal?

As activated carbon, especially granular activated carbon, does not retain mechanical particles well enough, it is highly recommended to install a pre-filter in front of the activated carbon to filter out mechanical particles. The pre-filter extends the life of the activated carbon filter cartridge by trapping contaminants that would otherwise clog the fine pores of the activated carbon, thus reducing the surface area for adsorption of other contaminants.

YOU MIGHT ALSO BE INTERESTED IN

Active Charcoal Filters, Ventilation

99,95  Z vklj. DDV

Moulded Parts, Ventilation

9,96  Z vklj. DDV

NEW
Out of stock
Active Charcoal Filters, KIT Combo, Ventilation

55,95  Z vklj. DDV

Controllers, Sensors and Probes, Ventilation

34,95  Z vklj. DDV

DELIVERY

Shipping Europe:
GLS and DHL

VARNO NAKUPOVANJE

Možnost plačila s kreditnimi karticami,
po predračunu ter plačilo po povzetju.

100% GARANCIJA

Garancija na tehnične
izdelke.

SHOW ALL CATEGORIES

Accessibility Toolbar